1500 mW Powerful Audio and 1.5 Times* Higher Sound Pressure
* Approximate, comparing the IC-V86 with the IC-V80.
1500 mW powerful audio
Optional 1500 mW Speaker-Microphone, HM-222HLWP
Dust-Protection, Water Resistance and a Tough Body
(IP54 and MIL-STD 810G)
19 hours* of Long Lasting Battery Life
* EX Hi power with BP-298. TX : RX : standby = 5 : 5 : 90 (3 sec. : 3 sec. : 54 sec. ) (The Power Save function is set to "P–S.16")
No PC Programming Necessary, Settings Changeable from the Radio*
* PC programming is also available.
Durable BNC Type Antenna Connector
Made in Japan Quality and Reliability
Other Features
- Audio volume/VFO mode/Memory channel mode can be changed with the rotary knob
- Supplied BC-240, battery charger with a charging control function that prolongs the life of the battery
- Integrated VOX function
- 200 memory channels, 1 Call channel and 6 scan edges
- Built-in CTCSS and DTCS encoder/decoder
- Priority, program, memory, skip and tone scanning
Frequency range
(TX/RX guaranteed range)
136–174 MHz
Type of emissions
F2D, F3E (FM, FM-N)
Number of channels
207 channels (200 memory channels, 1 call channel and 6 scan edges)
Antenna impedance
50Ω
Power supply requirement
7.5V DC
Operating temperature range
–20 ˚C to +60 ˚C, –4 °F to +140 °F
Frequency stability
±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F)
Current drain
(For the transceiver with a "U" mark on the serial number label)
TX
(EX Hi/Hi/Mid/Low)
1.4/1.0/0.5 A typical
RX
(Max. audio)
450 mA typ. (INT SP),
190 mA typ. (EXT SP, Single end)
450 mA typ. (EXT SP, BTL)
Dimensions (W×H×D)
(Projections not included)
58.6 × 112 × 30.5 mm, 2.3 × 4.4 × 1.2 in (with BP-298)
Weight (Approximate)
300 g, 10.6 oz
(with BP-298, FA-B57V)
Output power
(Hi/Hi/Mid/Low)
5.0/2.5/0.5 W
Maximum frequency deviation
±5.0 kHz/±2.5 kHz (Wide/Narrow)
Spurious emissions
Less than –60 dB
External microphone connector
3-conductor 2.5 (d) mm (1/10")/2.2 kΩ
Sensitivity
–124 dBm typical
Squelch sensitivity
–126 dBm typical
Selectivity (Wide/Narrow)
75 dB typical/
70 dB typical
Intermodulation
65 dB typical
Audio output power
(For the transceiver with a "U" mark on the serial number label)Internal SP
1500 mW typical (with 8 Ω load)
External SP
450 mW typical (single end)
1500 mW typical (HM-222HLWP connected, BTL)
External speaker connector
3-conductor 3.5(d)mm (1/8″)/8Ω
Standard
MIL-810 G
Method
Procedure
Low Pressure
500.5
I, II
High Temperature
501.5
I, II
Low Temperature
502.5
I, II
Temperature Shock
503.5
I-C
Solar Radiation
505.5
I
Rain Blowing/Drip
506.5
I, III
Humidity
507.5
II
Salt Fog
509.5
–
Dust Blowing
510.5
I
Vibration
514.6
I
Shock
516.6
I, IV
Also meets equivalent MIL-STD-810-C, -D -E and -F.
